Job added in hotlist
Applied job
Contract job
90-day-old-job
part-time-job
Recruiter job
Employer job
Expanded search
Apply online not available
View more jobs in Marietta, GA
View more jobs in Georgia

Job Details

Aircraft Structural Assembly Worker Senior

Location
Marietta, GA

Apply for this job






Profile

Description: Lays out and locates structural components or assemblies in making production assemblies as specified by design changes, working from blueprints or other authorized documents. Performs difficult structural pick-up and/or rework such as removing, replacing or realigning ribs, bulkheads, stringers, or fittings in completed skinned assemblies, or where a considerable portion of the operation consists of reforming, recontouring or refitting to provide an acceptable assembly. Works structural changes which materially alter previous assembly references and practice.Performs trimming, reforming and altering parts and structures as required. Fabricates detail parts such as shims, splices, gussets, angles, brackets, doublers, stiffeners and patches. Performs portable milling operations on wing and center section attaching joints.Must be able to layout and secure coordination of assemblies working to station, water, center, butt, and chord lines shown on engineering documents.When required, works from blueprints or other authorized documents where complete information is not readily available and/or with inadequate tooling, or without aid of tooling. Works from production, pre- release, check, detail, assembly and installation blueprints, D.A.T.'s sketches or other authorized documents.Lays out and locates structural components or assemblies in making production installations as specified by design changes, working from blueprints or other authorized documents. Performs such final assembly operations as pick-up and rework on structures and installations, installing shortages, and bringing up all items to latest engineering changes. In addition, makes corrections of a mechanical nature on plumbing, electrical, controls, and power plant installations.Operates controls for free operation and makes corrective adjustments short of operational check-out. Operates landing gear, up locks and down locks, to check for clearance. Completes installation of and fits such items as landing gear doors, flaps, etc. Fits or refits fillets; lays out and installs fillets as required. Fabricates structural items such as clips, brackets, angles, gussets, supports, etc., required.Improvises shop aids to facilitate assembly and installation as required.Works off sub-assembly and final assembly squawks as required. Must be able to layout and secure coordination of assemblies working to station, water, butt, center and chord lines, shown on engineering documents.When required, works from blueprints or other authorized documents where complete information is not readily available and/or with inadequate tooling, or without the aid of tooling. Works from production, pre-release, check, detail, assembly and installation blueprints, photographs, charts and diagrams, D.A.T.'s, sketches or other authorized documents.Works with authorized liaison personnel as necessary to determine satisfactory assembly and installation sequence. Points out need for tooling, parts, or assembly corrections.May install power plants and propellers when so assigned.Refers to assembly prints, sketches, specification sheets, planning and other authorized documents to ascertain size, type, and location of rivets and detail components to be assembled. Sets up rivet machine by selecting and installing proper combination drill-countersink or punch-dimple sets and upper and lower anvils in operating head and bottom post. Selects, installs and fills proper size rivet hoppers. Lays out rivet patterns to scale as required. Recognizes and notifies designated personnel of improper machine functioning. Installs heater blocks and sets specified temperature and dwell time when performing punch-hot dimple-riveting. Performs rework such as drilling out and replacing defective rivets. Performs satisfactorily any function of the Structures Assembler classification as required.Desired Skills: Aerospace and Defense structural assembly experienceA&P license Basic Qualifications: Note to hourly employees at Aeronautics, Marietta: You are not eligible to apply via the LMCareers talent gateway for any positions that are included in your current bargaining unit (union).Minimum Four years of experience as an Aircraft Structural Assembly Worker. This classification is multi-skilled and these employees may be assigned to do only one element of these skills such as structures installation/assembly only rather than electrical, hydraulic/plumbing, and/or controls installation/assembly. Therefore, to meet the above requirement an employee review must indicate satisfactory performance in structures assembly as well as hydraulic/plumbing, and/or controls. An employee may be required to work under pressurized conditions or in confined areas which require clearance of any applicable medical limitations on weight lifting, body movement or pressurization effects. Pressurizer certification will also be required.At the start of employment, you will be required to attend a skills training program, and take and pass a performance demonstration test following completion. Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.Join us at Lockheed Martin, where we're engineering a better tomorrow. Job Category: Hourly/Non-Exempt Business Unit: ESS0343 AERONAUTICS COMPANY Relocation Available: Yes Career Area: Manufacturing Clearance Level: None Type: Full-Time Virtual Location: no Work Schedule: 9x80A-9,9,9,9,8 hrs/d in wk1, /9,9,9,9,off in wk2 Shift: Second

Company info

Sign Up Now - AviationCrossing.com

Similar Jobs:
At Delta, we move the people who move the world. With an industry-leading global network, Delta Air Lines and Delta Connection carriers offer service to 306 destinations in 52 countries on six continents.  Recognized as the best i...
MUST APPLY ON OUR CAREERS SITE IN ORDER TO BE CONSIDERED FOR ANY POSITION! APPLY HERE: WWW.ACCUFLEETCAREERS.COM SUMMARY: *Cleaning the inside of the aircraft between flights and flights that remain overnight *Wet was...
Part-Time Line Service Technicians Needed!\nTraining Provided\nWe Service Private Jets\nSignature Flight Support, the world's largest FBO network, is hiring Customer-Oriented Line Service Technicians at our FTY Facility in beautif...
EmploymentCrossing provides an excellent service. I have recommended the website to many people..
Laurie H - Dallas, TX
  • All we do is research jobs.
  • Our team of researchers, programmers, and analysts find you jobs from over 1,000 career pages and other sources
  • Our members get more interviews and jobs than people who use "public job boards"
Shoot for the moon. Even if you miss it, you will land among the stars.
AviationCrossing - #1 Job Aggregation and Private Job-Opening Research Service — The Most Quality Jobs Anywhere
AviationCrossing is the first job consolidation service in the employment industry to seek to include every job that exists in the world.
Copyright © 2018 AviationCrossing - All rights reserved. 168