connection to 192.168.30.18:3312 failed (errno=111, msg=Connection refused)connection to 192.168.30.18:3312 failed (errno=111, msg=Connection refused)
TX - Addison - Addison Airport - Addison, TX
Installation - Maint - Repair
The Aircraft Maintenance Technician is responsible for providing scheduled and unscheduled maintenance on primarily Beechjet, King Air, Piper and Socata TBM aircraft. Candidate must have excellent troubleshooting skills with an emphasis on electrical systems and be well-versed on Inspections and time intervals on each aircraft. Position reports directly to the Aircraft Service Manager and/or his Service Supervisor for direct supervision and support.
Key Duties and Responsibilities
Provide routine, scheduled and unscheduled maintenance including Phase/Annual inspections for primarily Beechjet, King Air, Piper & Socata TBM aircraft. Repair and maintain the operating condition of aircraft assemblies.
Ensure that all repairs are accomplished by acceptable methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator.
Work effectively with Quality Assurance Dept to ensure completed work adheres to Company’s highest standards of quality and excellence.
Ensure that all work accomplished will be completed in accordance with the manufacturer’s maintenance and repair instructions and TITLE 14 CFR part 43.
Exercise all reasonable care to protect all parts-sub assembles; major assembles and completed units against loss or damage
Must have High School Diploma or GED
Valid Airframe & Powerplant License
Inspectors Authorization (IA), preferred
At least 3-5 years experience working with Beechjet, King Air, Piper and Socata TBM Aircraft, preferred
Strong understanding in 145 repair station operation/regulations required
Excellent skill set with:
Electrical troubleshooting and well-versed on King Air Dual and Triple Fed buss systems
PT6A-series & JT15-series engines including Hot Sections/Rigging/Troubleshooting & fully Run Qualified
Sheetmetal skills a plus but not required
Knowledge of maintenance manuals and FAR’s
Knowledge of FAA regulations
Ability to perform error free work with ability to meet/exceed deadlines and time accountability requirements.
Excellent Organizational, Customer Service, Training, and Communication Skills
Outstanding team building ability
Professional in appearance and mannerisms
Ability to handle conflict
Able to develop a friendly rapport
A sincere desire to assist customers
Ability to pass a drug screening test
Able to pass a background check
Clean driving record
Willing to work off location, if needed
Willing to work weekends, if needed
Ideal candidate will have the following work styles:
Being pleasant with others on the job and displaying a good-natured, cooperative attitude
Being reliable, responsible, and dependable, and fulfilling obligations.
Attention to Detail
Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations
Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace
A willingness to take on responsibilities and challenges
Being sensitive to others' needs and feelings and being understanding and helpful on the job
Developing one's own ways of doing things, guiding oneself with little or no supervision, and depending on oneself to get things done
Persistence in the face of obstacles